Features of cold-rolled steel coil :
1, cold rolled steel coil thickness more accurate, smooth surface, beautiful, but also has superior mechanical properties, especially machining performance.
2. The maximum thickness of cold-rolled steel coil is less than 0.1-- 8.0mm, such as the thickness of cold-rolled steel coil in most factories is less than 4.5mm;The minimum thickness and width are determined according to the equipment capacity and market demand of each plant.
3, cold rolled steel mill power, low rolling efficiency, and the rolling process in order to eliminate the work hardening have to carry out intermediate annealing, so the cost is higher, but cold rolled steel surface bright, good quality, can be used to process finished products, cold rolled steel is widely used.
◆ Standards
Q215 Carbon Steel Coil | GB | ASTM | JIS | BS |
Q215A | Gr.C Gr1.58 | SPHD SPHC | 040A12 S185 | |
Q215B | Gr.58 | SS330 SPHC SPHD | 040A12 |
◆ Properties
Chemical properties:
Q215 Carbon Steel Coil | Uniform Number Code | Grade | Deoxygenation Method | C | Si | Mn | P | S |
U12152 | A | F、Z | ≤0.12 | ≤0.30 | ≤0.50 | ≤0.035 | ≤0.040 | |
U12155 | B | F、Z | ≤0.15 | ≤0.35 | ≤1.20 | ≤0.045 | ≤0.050 ≤0.045 | |
The uniform numbers of killed steel and special killed steel grades are shown in the table, and the unified numerical codes of boiling steel grades are as follows: Q215AF--U12150 , Q215BF--U12153 . |
Mechancal properties:
Q215 Carbon Steel Coil | Grade | Yield Strength ReH/(N/mm2) | Tensile strength b Rm/(N/mm2) | Elongation after break A/% | Impact test (V-notch) | ||||||||||
Thickness (or diameter)/mm | Thickness (or diameter)/mm | temperature/℃ | Impact absorption energy (longitudinal)/J | ||||||||||||
≤16 | >16~40 | >40~60 | >60~100 | >100~150 | >150~200 | ≤40 | >40~60 | >60~100 | >100~150 | >150~200 | |||||
A | ≥215 | ≥205 | ≥195 | ≥185 | ≥175 | ≥165 | 335~450 | ≥31 | ≥30 | ≥29 | ≥27 | ≥26 | - | - | |
B | +20 | ≥27 | |||||||||||||
b For steel with a thickness greater than 100mm, the lower limit of tensile strength is allowed to be reduced by 20N/mm2. The upper limit of tensile strength of wide-band steel (including shear steel plate) is not a delivery condition. |
Q215 Carbon Steel Coil | Specimen Direction | Cold bending test 180° B=2αa | |
Steel thickness (or diameter)b / mm | |||
≤60 | >60~100 | ||
Center diameter d | |||
vertical | 0.5α | 1.5α | |
horizontal | α | 2α | |
a B is the width of the sample, and α is the thickness (or diameter) of the sample. b When the thickness (or diameter) of the steel is greater than 100mm, the bending test shall be determined through negotiation between the two parties. |
◆ Characteristic
Q215 cold rolled carbon steel coil has high plasticity, toughness and welding performance. Q215 carbon steel coil also has good stamping performance, but its strength is low.
◆ Application
Q215 cold rolled carbon steel coils are mainly used to manufacture anchor bolts, ploughshares, chimneys, roof panels, rivets, low-carbon steel wires, thin plates, welded pipes, tie rods, hooks, brackets, welded structures, etc.
◆ Purchasing Information
Product name | Q215 Cold Rolled Carbon Steel Coil |
Thickness | 1.5-25mm |
Width | 1250-2500mm (Or as custom's request) ( regular width 1000mm, 1250mm, 1500mm ) |
Coil ID | 508mm or 610mm |
Coil weight | 3 - 8 ton or as client requirement |
Standard | ASTM EN DIN GB ISO JIS BA ANSI |
Technique | hot rolled cold rolled (as custom's request) |
Surface Treatment | Bare/Shot Blasted and Spray Paint or as required. |
Application | Used in home appliances construction, machinery manufacturing, container manufacturing, shipbuilding, bridges, etc. |
Tolerance | ±1% |
MOQ | 1 ton |
Supply Ability | 5000 tons / month |
Lead Time | 7-15 working days after the receipt of 30% deposit |
Payment Terms | 30%T/T Advance + 70% Balance |
Price Terms | FOB, CFR, CIF, EXW |
Packing | Standard sea-worthy package or as required |
◆ FAQ
Q:Can you send samples
A:Sample can be for free,freight cost collect.
Q:What product information do I need to provide?
A:Steel grade/thickness/width/quantity,these will decide the price.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q:What are the certifications for your products?
A:We have ISO 9001,CE,SGS,BV and other certifications.
Q:How about the delivery time?
A:Regularly the delivery time around 10-15 days,customized one will inform the delivery time ahead.
Q:Does the product have quality inspection before loading?
A:All the products are strictly tested before packaging,also can inspect by third party inspection.
Q:How to pack the products?
A:Standard export package with waterproof film and wooden pallet.It can effectively protect products from corrosion.